Information About The Product; Technical Data - Quick BTQ125 Installation And Use Manual

1 - Information about the product

BEFORE USING THE THRUSTER, CAREFULLY READ THIS USER MANUAL.
IF IN DOUBT, CONTACT YOUR NEAREST QUICK
F
QUICK RESERVES THE RIGHT TO INTRODUCE CHANGES TO THE EQUIPMENT AND THE CONTENTS OF THIS MANUAL WITHOUT PRIOR NOTICE. IN CASE OF DISCREPANCIES OR ERRORS
®
BETWEEN THE TRANSLATED TEXT AND THE ORIGINAL ITALIAN TEXT, PLEASE REFER TO THE ITALIAN TEXT.
1.0 - Installation requisites
It is strongly recommended to entrust a professional the predisposition and positioning of the tunnel in the hull.
These instructions are generic, and do not show by any means the details of the operations of presetting the thruster, which
falls under the competence of the shipyard. In case of problems caused by a defective installation, the installer will be held
responsible.
Despite all components and moving mechanical parts are of high quality, the correct installation of the propulsion unit is fun-
damental for a safe and efficient use of the boat, as well as of the same propulsion unit.
Please note that the installation of such unit is an operation requiring experience as well as technical competence. It is rec-
ommended to entrust the installation to competent staff and to consult the manufacturer or naval architects to fully evaluate
the entity of the work.

1.1 - Technical data

MODELS
Propeller type
Tunnel Ø
Motor Power
Voltage
Fusible
Thrust
Weight
Limit thickness values
of the tubes
L < 5 m
Recommended
5,1 < L < 10 m
cable section (*)
10,1 < L < 20 m
(*) L = positive cable + negative cable
18
DEALER.
®
BTQ1102512
110 mm (4" 21/64)
1,3 Kw
12 V
130 A CNL DIN
25 kgf (55.1 lb)
9,0 kg (19.8 lb)
min. 3 mm - max 7 mm (min. 1/8" - max 9/32")
35 mm (AWG 2)
2
50 mm (AWG 1)
2
70 mm (AWG 2/0)
2
BTQ110-125 INSTALLATION AND USE MANUAL - IT EN - REV004A
BTQ110/125
BTQ1253012
2 counter rotating
125 mm (5")
1,5 Kw
12 V
225 A CNL DIN
30 kgf (66.1 lb)
10,0 kg (22.0 lb)
50 mm (AWG 1)
2
70 mm (AWG 2/0)
2
95 mm (AWG 3/0)
2
EN
BTQ1254012
125 mm (5")
2,2 KW
12 V
325 A CNL DIN
40 kgf (88.2 lb)
10,8 kg (23.8 lb)
70 mm (AWG 2/0)
2
2 x 50 mm (2 x AWG 1)
2
2 x 70 mm (2 x AWG 2/0)
2