Maintenance - Quick BTQ125 Installation And Use Manual

8 - Maintenance

8.0 - BTQ110 Maintenance
Quick Thrusters are made in materials that are resistant to the sea environment: In any case, it is indispensable to periodi-
®
cally remove salt deposits that form on the outer surfaces to avoid corrosions and consequent system inefficiency.
WARNING: make sure that the power supply to the electric motor is not switched on when maintenance opera-
tions are carried out.
F
ACCORDING TO THE USE WE RECOMMEND CHECKING PERIODICALLY THE OIL SEALS AND IF NECESSARY
REPLACING THEM.
Maintenance operations to be performed once a year
Follow the points below:
• Clean propeller (15), tunnel and gearleg (19).
• Replace the anode (32) (carry out this operation more often if needed).
• Replace the propeller if damaged or worn out.
• Check the tightness of all screws.
• Ensure that there is no water seepage inside.
• Check that all electrical connections are well tightened and oxide-less.
• Check that the batteries are in good conditions.
WARNING: do not paint the anode (32), the sealing and the gearleg' shaft where the propeller is lodged.
BTQ 1102512
NR. DESCRIPTION
1 MOTOR MOUNTING SCREW
2 MOTOR MOUNTING WASHER
3 MOTOR 1,3KW 12V
4 REVERSING CONTACTOR UNIT T6411-12
5 CARTER "A" SPACER
6 CARTER REVERSING CONTACTOR UNIT
7 FASTENERS CARTER
REVERSING CONTACTOR UNIT
8 GEARLEG MOUNTING SCREW
9 WASHER
ELASTIC COUPLING HALVES
10
BTQ 110-125 PL HEXAG
11 MOTOR FLANGE
12 O-RING
13 GEARLEG GASKET
14 GEARLEG
15 PROPELLER
16 SELF-BRAKING NUT
17 ANODE
7
6
BTQ110-125 INSTALLATION AND USE MANUAL - IT EN - REV004A
BTQ110/125
5
4
15
17
16
16
EN
1
2
3
8
9
10
11
12
13
14
27