Prepare And Install The Secure Router 4134 Chassis; Unpacking And Inspecting The Chassis And Shipping Accessories - Nortel Secure Router 4134 Installation Manual

.
Prepare and install the Secure Router
4134 chassis
This section describes how to unpack, inspect, and install the Secure
Router 4134. For instructions to install interface modules in the Secure
Router 4134, see Nortel Secure Router 4134 Installation — Hardware
Components (NN47263-301).

Unpacking and inspecting the chassis and shipping accessories

You must carefully unpack the chassis and verify that all accessories have
shipped with it.
Procedure steps
Step
1
2
3
ATTENTION
If you detect any damage, do not install the chassis. Call the Nortel Technical
Solutions Center in your area.
The following table lists the accessories you can find in the shipping
container with the Secure Router 4134. Place a mark in the third column of
the table to verify that you have received each accessory.
Action
Remove the chassis from the shipping container.
Place the chassis on antistatic material.
Check for damage or missing accessories.
Nortel Secure Router 4134
Installation — Chassis
NN47263-300 03.01 7 September 2009
Copyright © 2007-2009 Nortel Networks. All Rights Reserved.
--End--
39