Cautions And Warnings For The Secure Router 4134 - Nortel Secure Router 4134 Installation Manual

12 Secure Router 4134 regulatory information and safety precautions

Cautions and warnings for the Secure Router 4134

The following precautionary messages apply to the Secure Router 4134.
For your safety, read these precautions carefully before proceeding with
installation of the product.
Hardware Notice
The Lithium battery in this product is part of a non-volatile memory device
and will retain data for 10 years in the absence of power. Nortel does not
consider the lithium battery in this unit a field replaceable or serviceable
part and should not be accessed by the customer.
DANGER
Danger—High Voltage notices provide information about how to
avoid a situation or condition that can cause serious personal
injury or death from high voltage or electric shock.
DANGER
Danger notices provide information about how to avoid a
situation or condition that can cause serious personal injury or
death.
WARNING
Only qualified service personnel must perform the installation.
Read and follow all warning notices and instructions marked on
the product or included in the documentation. For translations
of this message, see
statement" (page
WARNING
This product relies on the building installation for overcurrent
protection. Ensure that a fuse or circuit breaker no larger than
120 V AC, 15 A U.S. (240 V AC, 10 A international) is used on
the phase conductors. For translations of this message, see
Overcurrent warning statement.
CAUTION
To reduce the risk of fire, use only number 26 AWG or larger
UL Listed or CSA Certified Telecommunication Line Cord for all
network connections.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Nortel Secure Router 4134
Installation — Chassis
NN47263-300 03.01 7 September 2009
Copyright © 2007-2009 Nortel Networks. All Rights Reserved.
"Qualified service personnel warning
56).