Nortel Secure Router 4134 Installation Manual page 23

Figure 3 "Secure Router 4134 air flow" (page 27)
Secure Router 4134 chassis. Arrows indicate air flow through the chassis.
SeeTable 5 "Secure Router 4134 air and access panels" (page 27)
information about the air flow and access panels on the Secure Router
4134.
Figure 1
Secure Router 4134 rear panel with power supplies and fan tray
Table 1
Secure Router 4134 rear panel description
Item Description
1
Fan tray.
2
Compact Flash ejector button.
3
Compact Flash slot (CF1).
4
Status LEDs: The upper LED indicates system status. The lower LED indicates the
fan status.
5 Status LEDs: The upper LED indicates the status of installed Small Modules. The
lower LED indicates the status of installed Medium and Large Modules.
6 Status LEDs: The upper LED indicates the status of the power supply installed in
power supply slot 1. The lower LED indicates the status of the power supply installed
in power supply slot 0. Green indicates the Secure Router 4134 has power. Off
indicates the router is not powered.
7
USB port.
8
Management port (FE 0/0) with embedded LEDs.
9 Auxiliary port.
Nortel Secure Router 4134
Installation — Chassis
NN47263-300 03.01 7 September 2009
Copyright © 2007-2009 Nortel Networks. All Rights Reserved.
Secure Router 4134 chassis 23
shows the side view of a
for