Nortel Secure Router 4134 Installation Manual page 24

24 Nortel Secure Router 4134 chassis fundamentals
Item Description
10 Two power supply slots. The lower power supply slot is identified as slot 0. The
upper power supply slot is identified as slot 1.
This chassis contains two 250 W AC power supplies.
11
On/off switches.
12 AC power connectors.
13 Service access panel.
14 The console port.
Figure 2
Secure Router 4134 chassis front panel with slot covers installed
Table 2
Secure Router 4134 front panel description
Item Description
1 Three Medium Module slots with slot covers installed.
2 Four Small Module slots with slot covers installed.
3 GE 0/1 and GE 0/2 ports are 10/100/1000Base-T ports.
The lower port is GE 0/1. The upper port is GE 0/2.
LEDs are embedded on port GE 0/2. The LED on the left of the port is a link status
LED for port GE 0/1. The LED on the right of the port is a link status LED for port
GE 0/2.
4 GE 0/3 port status LED.
5
Two GbE (GE 0/3 and GE 0/4) SFP ports.
6 GE 0/4 port status LED.
7
Slot numbering legend.
8
Ground lug location (ground lug not installed). For information about installing the
ground lug, see "Installing the terminal lug on the Secure Router 4134" (page
Nortel Secure Router 4134
Installation — Chassis
NN47263-300 03.01 7 September 2009
Copyright © 2007-2009 Nortel Networks. All Rights Reserved.
44).