Nortel Secure Router 4134 Installation Manual page 26

26 Nortel Secure Router 4134 chassis fundamentals
LED
PS0
FE 0/0
The following table lists the LEDs on the front panel of the Secure Router
4134 and describes the LED behavior.
Table 4
Secure Router 4134 front panel LED indicators
LED
GE 0/1 port status
LED
GE 0/2 port status
LED
GE 0/3 port status
LED
GE 0/4 port status
LED
Color
Off
Green
Red
Green
Blinking amber
Color
Off
Green
Off
Green
Off
Green
Off
Green
Nortel Secure Router 4134
Installation — Chassis
NN47263-300 03.01 7 September 2009
Copyright © 2007-2009 Nortel Networks. All Rights Reserved.
Definition
The Secure Router 4134 is not powered, or
no power supply is present in slot 1.
A power supply is installed in slot 0, is
functioning normally, and is activated
(power-up testing is complete).
A power supply is installed in slot 0, but is
malfunctioning.
A cable is connected and the link is up.
Data collisions are occurring on the port.
Definition
No cable is connected; no link is established.
A cable is connected; a link is established.
No cable is connected; no link is established.
A cable is connected; a link is established.
No cable is connected; no link is established.
A cable is connected; a link is established.
No cable is connected; no link is established.
A cable is connected; a link is established.