Control Thermostat - NUVE FN 300 User Manual

4.2.

Control Thermostat

1. Temperature Display: This display shows the chamber temperature during the
operation and the set temperature value during programming. The error codes are
also shown on this display.
2. Time Display: This display shows the elapsed time during the operation and the set
value during programming.
3. Alarm Mute Key: This key is pushed to interrupt the alarm which goes off when the
program ends and if any failure occurs during the operation.
4. Start / Stop Key: This is key which is pushed to start the program or to stop the
running program.
5. Temperature Set Key: This key is pushed to set the temperature.
6. Temperature Value Increase/Decrease Keys: These key are pushed to increase or
decrease the values on the displays.
7. Time Set Key: This key is pushed to set the time. (01-999 minutes and Hold position)
8. Time Value Increase/Decrease Keys: These key are pushed to increase or
decrease the values on the displays.
9. Heat Led: This led indicates that the chamber is heated.
9