2.2.2
Jumper and Connector Locations
The main board features a number of connectors and jumpers for system configura-
tion. The location of each jumper and connector on the main board is shown in Figure
2.1. The function of each of the connectors and jumpers is listed in Table 2.1 below.
Figure 2.1 Jumper and Connector Locations on Main Board
Table 2.1: Jumpers and Switches
Name
PSIN1
BAT1
JCOMS1
PMOD1
Function
Power button pin header
RTC battery pin header
Clear CMOS settings
ATX, AT mode switch
9
ITA-5231 User Manual