3.5
RTC Battery Installation
The RTC battery can be accessed via the front panel.
1.
Open the RTC battery port cover.
2.
Insert the RTC battery into the holder and connect the cable.
3.
Close and lock the RTC battery port cover.
Note!
The RTC battery settings can be configured using the BIOS utility. The
+VBAT should be >2.6V. The standard battery lifetime is 3 years+.
Users can change the RTC battery according to voltage requirements.
Figure 3.11 Battery Module (ITA-EM-BA51-00A1E)
Figure 3.12 RTC Battery Installation
23
ITA-5231 User Manual