Sub Hopper Toner Replenishing Mechanism - Minolta EP5000 General, Mechanical/Electrical

Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
1156SBM1306A

13-6. Sub Hopper Toner Replenishing Mechanism

Sub Hopper Toner Replenishing Motor M9 is energized for the toner replenishing time
which is calculated based on the ATDC Sensor output voltage (T/C ratio) and the size
of the paper being fed through the copier.
Sub Hopper Toner
Replenishing Motor
M9
Sub Hopper
Sleeve/Magnet
Roller
Controlled Part
M9
Sub Hopper Toner
Supply Roller
Rear of Copier
Front of Copier
Control Signal ON
PJ11A-2A L
M-44
Bucket Roller
Developer Conveying/
Agitating Screw
1134M014AA
OFF WIRING DIAGRAM
H 2-H