Interleaf EP5000/EP4000 DIS/REASSEMBLY, ADJUSTMENT
97.04.01
4. Touch the shift key A or " to change the setting value.
5. Touch Enter
to validate the setting.
Setting Instructions
D If dimension A on the copy is longer than 11.5 mm, increase the setting value.
D If dimension A on the copy is shorter than 8.5 mm, decrease the setting value.
*If the measurement does not fall within the specifications through one setting, try another
setting.
NOTE
Be sure to touch
Enter
screen. If this is not done, the old setting remains valid.
1156D157CA
Touch This Key if Measurement is Longer.
Touch This Key if Measurement is Shorter.
before pressing the Panel Reset Key to return the copier to the Basic
D-86