Minolta EP5000 General, Mechanical/Electrical page 246

Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
Tech. Rep. Mode " Tech. Rep. Choice
Touch Panel Display
Leading Edge Erase
Trailing Edge Erase
Loop Adjust (Drawer)
Loop Adjust (Man)
Function Limit
Select whether to enable ("Yes") or disable ("No") the leading edge erase.
NO
Select whether to enable ("Yes") or disable ("No") the trailing edge erase.
NO
Adjust the length of the loop before the Synchronizing Rollers to be formed
in paper fed from the copier drawer.
Display Description
47 Loop length approx. 1 mm
48 Loop length approx. 3 mm
49 Loop length approx. 5 mm
50 Loop length approx. 7 mm
Adjust the length of the loop before the Synchronizing Rollers to be formed
in paper fed via the Multi Bypass Tray or a paper feeder option.
Display Description
47 Loop length approx. 1 mm
48
Loop length approx. 3 mm
49 Loop length approx. 5 mm
50 Loop length approx. 7 mm
Select whether to limit ("ON") the functions that can be set on the control
panel or not ("OFF").
Functions that can be set are limited to the
ON
number of copies to be made, paper size,
zoom ratio, and exposure level only.
OFF All functions can be set.
S-22
Operation
YES
YES
Display Description
51 Loop length approx. 9 mm
52 Loop length approx. 11 mm
53 Loop length approx. 13 mm
Display Description
51 Loop length approx. 9 mm
52
Loop length approx. 11 mm
53 Loop length approx. 13 mm