Minolta EP5000 General, Mechanical/Electrical page 134

Interleaf EP5000/EP4000 DIS/REASSEMBLY, ADJUSTMENT
97.04.01
1156D016AA
6. Remove two C-clips from each Paper Take-Up Roll/Feed
Roll Assy. (The illustration is for the Paper Take-Up Roll/
Feed Roll Assy for the 2nd Drawer.)
1156D013AA
7. Remove the bushing from the front end of each Paper
Take-Up Roll/Feed Roll Assy.
8. Remove the rear bushing from the holder.
1156D014AA
9. Move the coupling holder of each Paper Take-Up Roll/
Feed Roll Assy in the direction of the arrow to work it off the
pin of the copier. This allows the Paper Take-Up Roll /Feed
Roll Assy to come out of the copier.
1156D015AA
NOTE
When reinstalling the Paper Take-Up Roll/Feed Roll Assy,
place it above the Pressure Release Lever.
D-15