Minolta EP5000 General, Mechanical/Electrical page 238

Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
1156SBS040406A
Touch Panel
Display
Orig. " Copy Select the type of Orig. " Copy setting selected automatically when the copi-
Default er is turned ON or Panel Reset key pressed. If "Duplex only" is selected for
"Simplex/Duplex" of the "Tech. Rep. Choice" function, neither 1 " 2 nor 1 "
2in1 are displayed.
NOTE: Some of the functions may not be displayed depending on the type of
Auto Power-OFF Select whether to turn ON or OFF the Auto Shut Off function that shuts down
Mode the copier a given period of time after a copy cycle has been completed or the
last key operated.
Selecting "ON" means setting the time it takes the Auto Shut Off function to
be activated, that can range from 1 min. to 240 min.
NOTE: "OFF" is displayed when "Enable" is selected for "Non-Auto Shut off"
Original on Glass Select whether to turn "ON" or "OFF" the beep that sounds when you attempt
to load an original in the document feeder with another one left on the glass.
Administrator Mode The entry of the "Administrator #" set using the Tech. Rep. mode permits the
settings of the following functions.
Copy Track Select the number of accounts to be controlled.
Copy Track This function is displayed when the above "Copy Track" setting is
changed, prompting you to select whether to initialize ("YES") the
copy track data so far taken or not ("NO")
Copy Track Data When "Count Reset" is touched, it clears all data under control.
[6/6]
Setting (The default is
1 " 1 1 " 2 in1
1 " 2 1 " 2-2 in1
options the copier is equipped with.
OFF
of the "Administrator Mode" function.
Beep ON
OFF 100 Accounts
YES (initialize)
S-14
Highlighted
.)
2 " 2
EP4000: 90 min.
1 to 240
EP5000: 60 min.
Beep OFF
1000 Accounts
NO (do not initialize)