Minolta EP5000 General, Mechanical/Electrical page 234

Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
1156SBS040402A
Touch Panel
Display
Expo. Mode Priority Specify the default exposure mode selected automatically when power is turned
ON or the Panel Reset key pressed.
Expo. Level Priority Auto:
Manual:
NOTE: EXP. 1 (Lighter) to EXP. 9 (Darker)
Manual Expo. Determine the default voltage curve (EXP. level) in the Manual Exposure mode,
Adjust as optimized by the type of original.
NOTE: EXP. 5 uses as reference the voltage value automatically adjusted by
Finishing Priority Select the default finishing type when the copier is equipped with a Sorter or Sta-
ple Sorter.
[2/6]
Setting (The default is
Auto
Select the default exposure level in the Auto Exposure mode.
Set the default exposure level in the Manual Exposure mode.
<Auto Exposure>
Lighter Normal
<Manual Exposure>
Lighter Normal
Mode 1 Halftone images, photos
Mode 2 Ordinary originals
Mode 3 Originals with a colored back-
ground or faint texts
<Manual Exposure Voltages in Different Modes>
Manual Exposure Voltage (V)
EXP. 1 2 3 4
Mode 1 +8 +5 +2 +1
Mode 2 +8 +6 +4 +2
Mode 3 +8 +7 +6 +3
the F5 operation.
Non Sort Group
Sort Sort Staple
S-10
Highlighted
.)
Manual
Darker
Darker
5 6 7 8 9
0 –1 –2 –5 –8
0 –2 –4 –6 –8
0 –3 –6 –7 –8
Hole Punch
+
NOTE: Hole Punch can be
combined with any one
of the functions.