Minolta EP5000 General, Mechanical/Electrical page 108

Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
1156SBM2400A
24 EXIT UNIT
Drive from the Fusing Unit is transmitted via a gear train to turn the 1st/2nd Paper Exit
Rollers.
Paper Exit
Switch S53
Exit/Duplex
Solenoid SL5
Main Control Board PWB-A outputs a signal to energize Exit/Duplex Switching Solenoid
SL5, which switches the position of the Exit/Duplex Switching Plate. The Unit has Paper
Exit Switch S53 built into it which detects a sheet of paper being fed out of the Unit. (For
more details of switching control, see the Service Manual for "DUPLEXING UNIT").
Paper Exit Roller/Rolls
Exit/Duplex Switching Solenoid SL5
Control Signal
S53 PWB-A PJ14A-8
Control Signal
SL5 PWB-A PJ14A-6
1st Paper Exit Roller
Paper Exit Switch S53
ON
L
Energized Deenergized
L
M-94
Left Door
Drive Gear
Exit/Duplex Switching
Plate
1136M081AA
Exit/Duplex Switching Plate
1139M082AA
OFF WIRING DIAGRAM
H 3-D
WIRING DIAGRAM
H 3-C