Logging And Debugging Parameters - Avaya Vantage Installing And Administering

Parameter

Logging and debugging parameters

Parameter
SYSLOG_ENABLE
D
SYSLOG_LEVEL
November 2017
Type Default Is set to
value default
on reset
Type Default Is set to
value default
on reset
Integer 0 Yes
Integer 3 Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Other operational parameters and settings
Description
• 1: Enabled.
• 2: Enabled. Avaya Vantage
LLDP frames only after receiving of an LLDP
frame.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Description
Specifies whether Avaya Vantage
messages. Assign one of the following values:
• 0: Syslog messages are disabled.
• 1: Syslog messages are enabled.
This parameter is supported in all modes.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file.
• The Settings menu on the device.
Specifies the severity level of syslog messages.
™
Avaya Vantage sends a syslog message if a
severity level of an event is equal or less than the
value specified in this parameter. Assign one of the
following values:
• 3: Error
• 4: Warning
• 5: Notice
• 6: Informational
• 7: Debug
This parameter is supported in all modes.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file.
™
™
starts to transmit
™
generates syslog
Table continues...
111