Changing Between Celsius And Fahrenheit; How To Recall 30 Readings In Memory Mode - Microlife IR1DQ1-1 Manual

taken as the reading:
1. New born infants in the first 100 days.
2.Children under three years of age with a compromised
immune system and for whom the presence or absence of
fever is critical.
3. When the user is learning how to use the thermometer for
the first time until he/she has familiarized himself/herself with
the instrument and obtains consistent readings.
4. If the measurement is surprisingly low.

7. Changing between Celsius and Fahrenheit

This thermometer can display temperature readings in either
Fahrenheit or Celsius. To switch the display between°C and °F,
simply turn OFF the unit, press and hold the START button 3
for 5 seconds; after 5 seconds, the current measurement scale
(«°C» or «°F» icon) will flash on the display 2 . Change the
measurement scale between °C and °F by pressing the START
9
button 3 . When the measurement scale has been chosen, wait
for 5 seconds and the unit will automatically enter the «ready for
measuring» mode.

8. How to recall 30 readings in Memory Mode

This thermometer can recall the last 30 readings with a record of
both time and date.
• Recall mode AO : Press the M button 6 to enter Recall
mode when the power is off. The memory icon « M » will flash.
• Reading 1 - the last reading AO : Press and release the M
button 6 to recall the last reading. Number "1" and a flashing
"M" are displayed to indicate the last recalled reading.
• Reading 30 - readings in succession : Press and release
the M button 6 consecutively to recall the last 30 readings in
succession.
Pressing and releasing the M button 6 after the last 30 readings have
been recalled will resume the above sequence from reading 1.