Di Setting - ABB E-Hub 2.0 User Manual

DI setting

make the changes valid.
57 | © 2019 ABB | DOC. N° 1SDH002109A1001 - ECN000125349 - Rev. A
Parameters Description
Minimum value for the measurement,
Min
corresponding to the lower bound of input type.
Maximum value for the measurement,
Max
corresponding to the upper bound of input type.
NOTE: Please configure the AI channels according to the real environment. The AI
channels data will be upload to the cloud after finishing the provision process.
Click Modules   I/O module
•
• Inside I/O module page, select Digital tab to configure DI channels.
• DI could be configured as Pulse meter or Open/Close contact.
• Pulse meter: measuring value will be increased one weight at each pulse
• Open/Close contact: digital value 0 and 1 will be transferred into meaningful words set
in status 0 and status 1.
Fig. 37
Parameters
Parameters Description
Name AI channel name
DI input types for this channel:
Input type Pulse meter
Open/Close contact
Unit Unit for the measurement
Pulse weight Increment for Pulse meter.
Status 0 For Open/Close contact type: Meaning of status 0
Status 1 For Open/Close contact type: Meaning of status 1
NOTE: Please configure the DI channels according to the real environment. The DI
channels' data will be upload to the cloud after finishing the provision process. If
there is type changing in the DI channel, please do a re-provisioning process to
Default
0
100
HOW TO INSTALL THE PRODUCT | Basic configuration of I/O
ABB | E-Hub 2.0
Default
AI Channel No.
Pulse meter
N/A
0.1
Status 0
Status 1