How To Replace The Mounting Bracket With The Din Rail Mounting Clip Or Vice Versa; How To Replace The Mounting Bracket With The Din Rail Mounting Clip - ABB E-Hub 2.0 User Manual

2 - How to Replace the Mounting Bracket with the DIN Rail Mounting Clip or Vice Versa

How to Replace the
Mounting Bracket
with the DIN Rail
Mounting Clip
37 | © 2019 ABB | DOC. N° 1SDH002109A1001 - ECN000125349 - Rev. A
To replace the Mounting Bracket with the DIN Rail Mounting Clip on the product, complete
the following steps:
1. Remove the 3 screws that hold the Mounting Bracket in place
2. Remove the Mounting Bracket and the 3 spacers (H = 4mm; Ext. diam. = 14mm; Int. diam.
= 7mm)
3. Place the DIN Rail Mounting Clip
4. Tighten the 3 screws removed at step 1 by applying a torque of 0.7 Nm
Fig. 15
HOW TO INSTALL THE PRODUCT | How to Replace the Mounting Bracket with the DIN Rail Mounting Clip or Vice Versa
ABB | E-Hub 2.0