Table of Contents
Advertisement
6 - Antennas List
7 - RoHS 3 Compliance
8 - REACH Compliance
9 - WEEE Compliance
17 | © 2019 ABB | DOC. N° 1SDH002109A1001 - ECN000125349 - Rev. A
The E-Hub 2.0 has been certified with the following antennas:
Antenna Types
Manufacturer and Part Number
Linx Technologies ANT-DB1-RAF-RPS
Wi-Fi / Bluetooth
Taoglas MA950.W.A.LBICG.005
Taoglas GSA.8827.A.101111
Cellular
Taoglas MA950.W.A.LBICG.005
NOTICE
Within the EU, antennas have to be used in compliance with the RED requirements.
Within the US/Canada, antennas have to be used in compliance with the FCC/ISED
requirements.
The product, including all its components and its sub-assemblies, have been manufactured
in compliance with the Directive 2011/65/EU of the European Parliament and of the Council
of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical
and electronic equipment.
The product is certified according to the REACH Directive, taking in account Substances of
Very High Concern (SVHC), as specified in the list published by ECHA (European Chemical
Agency) at the time of the design.
In compliance with the Directive 2012/19/EU of the European Parliament
and of the Council of 4 July 2012 on waste electrical and electronic
equipment (WEEE), the symbol on the right, shown on the product or within
its literature, indicates separate collection for electrical and electronic
equipment (EEE) that has been placed on the market after 2005.
The product, at the end of its life cycle, must be collected separately and
managed in accordance with the provisions of the current Directive on
waste of electrical and electronic equipment.
Because of the substances present in the product, improper disposal can cause damage to
human health and to the environment.
To avoid any possible legal implications, contact your local waste collection body for full
collect and recycling information.
NORMS AND CERTIFICATIONS | WEEE Compliance
ABB | E-Hub 2.0
Advertisement
Table of Contents
