Table of Contents
Advertisement
4 - Electromagnetic Compatibility
Electromagnetic
Compatibility (for EU)
53 | © 2019 ABB | DOC. N° 1SDH002109A1001 - ECN000125349 - Rev. A
Conditions of operation
This product meets the requirements of the EC Directive 2004/108/EC on electromagnetic
compatibility.
This product is designed for use in industrial areas.
FCC compliance (for USA)
This device and its accessories comply with part 15 of FCC rules. Operation is subject to the
following two conditions:
•
This device and its accessories may not cause harmful interference.
•
This device and its accessories must accept any interference received, including
interference that may cause undesired operation.
Specifications
Processor
MCU
Memory
RAM
Storage
Embedded
Digital Input
Digital Output
I/O interfaces
Analog Input
Other
LEDs
Input
Power
Consumption
Operating Temp
Environment
Storage Temp
Regulatory
Safety
Certifications
Environmental
Ingress
Enclosure
Mechanical
Dimensions
Description
STM 32F072xx – 32 bit ARM Cortex M0
16KB SRAM with hardware parity
128KB Flash
6x Digital Input Ports Input Range 0-36V
Optoisolation 5kV (2.7kV RMS) Low Level Voltage: 0-1V
High Level Voltage: 2-36V
0/1 Level Threshold: 1V/2V (Factory Option: Customizable)
4x Digital Output Ports Optoisolation 5kV(2.7kV RMS)
Open Drain Output Transistors: 60V (Optorelay) AC/
DC Output: 0.5A MOSFET (with 0.5A Fuses)
2x Current Analog Input Ports
Input Range: 4-20mA
2x Voltage Analog Input Ports
Input Range: 0-36V
ADC Conversion: 12 bit Sigma Delta Sampling
Frequency: 1kHz Max Input Protection Circuitry (5kV
DC)
4x Digital Output Status 2x Programmable
Provided by E-Hub 2.0
0.3W Typical
-25 °C to +85 °C
-40 °C to +85 °C
FCC/ISED, CE
EN 60950 (Including UL Deviations to EN62368-1)
RoHS2; REACH
IP40 (enclosure only, excluding connectors)
Material: ABS - Colour: aluminium
90.3 x 59 x 43.7 mm (WxLxH)
DECLARATION OF CONFORMITY | Electromagnetic Compatibility
ABB | E-Hub 2.0
Advertisement
Table of Contents
