Cyber Security; Disclaimer - ABB E-Hub 2.0 User Manual

Warnings

3 - Cyber security

Disclaimer

TCP/IP based protocols
and used IP ports
5 | © 2019 ABB | DOC. N° 1SDH002109A1001 - ECN000125349 - Rev. A
WARNING! READ THE FOLLOWING MANUAL CAREFULLY BEFORE INSTALLING OR
• Keep this manual carefully with all the other available documents, including: Getting
Started for first installation, electrical diagrams, drawings and any descriptive notes.
• Keep these documents available during the E-Hub 2.0 installation, operating and
maintenance step to facilitate the following operations.
• Install the unit in compliance with the environmental, electrical and mechanical limits
described in the product documentation.
• E-Hub 2.0 has been designed to operate with voltage and current values within the
rated limits: do not install in systems that work at values exceeding these rated limits.
• Follow the safety procedures set by your company.
• Do not open lids or doors, do not work on devices before disconnecting all circuits and
checking that they are disconnected with a measuring instrument.
It is the sole responsibility of the customer to provide and continuously ensure a secure
connection between the product and the customer network or any other network. The
customer is required to establish and maintain any appropriate measures (including but not
limited to the installation of firewalls, application of authentication measures, encryption
of data, installation of anti- virus programs, etc.) to protect the product, the network,
its system and the interface against any kind of security breach, unauthorized access,
interference, intrusion, leakage and/or theft of data or information. ABB and its affiliates
are not liable for damage and/or losses related to such security breaches, unauthorized
access, interference, intrusion, leakage and/or theft of data or information.
To set up an IP firewall the following table summarizes the IP ports used by the device.
Interface Port
ETH0/Wi-Fi/Cellular 53
ETH0/Wi-Fi/Cellular 123
ETH0/Wi-Fi/Cellular 443
ETH1 22
ETH1 80
ETH1 443
ETH1 53
ETH1 67
ETH1 68
ETH1 69
ETH1 502
ETH1 502
WORKING ON E-HUB 2.0
Type Default state
UDP Closed/Outbound
UDP Closed/Outbound
TCP Closed/Outbound
TCP Open/Inbound
TCP Open/Inbound
TCP Open/Inbound
UDP Open/Inbound
UDP Open/Inbound
UDP Open/Inbound
UDP Closed/Outbound
TCP Open/Inbound
TCP Closed/Outbound
Description
DNS (Name resolution)
SNTP (Time synchronization)
HTTPS (Send data to cloud platform)
SSH (ABB maintenance access)
HTTP (Web server)
HTTPS (Web server)
DNS (Name resolution)
DHCP (Dynamic IP)
DHCP (Dynamic IP)
TFTP (Transfer configuration files)
Modbus TCP (Device configuration)
Modbus TCP (Field devices
communication)
Introduction | Cyber security
ABB | E-Hub 2.0