Introduction; Contents; Overview; Recipients - ABB E-Hub 2.0 User Manual

INTRODUCTION

1 - Contents

Overview

Recipients

3 | © 2019 ABB | DOC. N° 1SDH002109A1001 - ECN000125349 - Rev. A
This manual describes the characteristics of E-Hub 2.0.
In accordance with standard IEC 60050, this manual is aimed at two user profiles:
• expert persons, in electric environment (IEV 195-04-01): persons with sufficient training
and experience to enable them to perceive the risks and avoid the hazards potentially
created by electricity
• persons trained in an electrical environment (IEV 195-04-02): persons suitably informed
or supervised by electrical technicians to enable them to perceive the risks and avoid
the hazards potentially created by electricity
IMPORTANT: in this manual the tasks are specifically indicated that can be
performed by trained persons in an electrical environment. All the remaining tasks
described in the manual must be performed by trained persons in an electrical
environment.
ABB accepts no liability for damage to property or personal injury due to failure to comply
with the instructions contained in this document.
ABB | E-Hub 2.0
Introduction | Contents