2 - Basic configuration of I/O
AI setting
56 | © 2019 ABB | DOC. N° 1SDH002109A1001 - ECN000125349 - Rev. A
•
Connect via Ekip Connect 3 as described in the chapter before
Click Modules I/O module
•
Fig. 35
•
Inside I/O module page, select Analog tab to configure AI channels.
•
Channel 1, 2 for current analog input and 3, 4 for voltage analog input.
Click Add sensor to enable the setting channel if there is no sensor set at this position.
•
Click Edit to do the AI channel configuration.
•
Fig. 36
Parameters
Parameters
Description
Name
AI channel name
AI input types for this channel.
Input type
Current AI: 4 mA to 20 mA
Voltage AI: 0 V to +36 V
Unit
Unit for the measurement
Default
AI Channel No.
Current AI: 4 mA to 20 mA
Voltage AI: 0 V to +36 V
N/A
HOW TO INSTALL THE PRODUCT | Basic configuration of I/O
ABB | E-Hub 2.0