Table of Contents
Advertisement
SNTP Settings
Gateway enable
47 | © 2019 ABB | DOC. N° 1SDH002109A1001 - ECN000125349 - Rev. A
The SNTP Settings allows users to set time zone and SNTP for time synchronization.
•
Click Configuration to enter the page of configure.
Click SNTP box and select the appropriate Time zone in the drop-down list. Input a valid
•
SNTP server address, then switch on SNTP client enable, E-Hub 2.0 will sync time with
SNTP server.
Fig. 26
The Gateway enable setting allows user to access E-Hub 2.0's RTU devices.
•
Click Configuration to enter the page of configure.
•
Click Device configuration and switch on/off to enable/disable access RTU devices.
Click "Apply" and reboot the E-Hub 2.0 to make setting validated.
•
Fig. 27
Basic configuration via Ekip Connect 3 | General Settings
ABB | E-Hub 2.0
Advertisement
Table of Contents
