Table of Contents
Advertisement
3 - How to Install/Remove the Product on/from a DIN Rail
How to Install the
Product on a DIN Rail
How to Remove the
Product from a DIN Rail
40 | © 2019 ABB | DOC. N° 1SDH002109A1001 - ECN000125349 - Rev. A
Prerequisite: Replace the Mounting Bracket with the DIN Rail Mounting Clip To install the
product on a horizontal DIN rail, complete the following steps:
1. Hook the upper mobile latches of the DIN Rail Mounting Clip on the upper edge of the
DIN rail
2. Push the product against the DIN rail. The lower latches of the DIN Rail Mounting Kit are
locked on the DIN rail.
Fig. 18
To remove the product from a horizontal DIN rail, complete the following steps:
1. Push downwards the upper mobile latches of the DIN Rail Mounting Clip. The lower
latches are released from the DIN rail
2. Pull the product out
Fig. 19
HOW TO INSTALL THE PRODUCT | How to Install/Remove the Product on/from a DIN Rail
ABB | E-Hub 2.0
Advertisement
Table of Contents
