Fcc/Ised Regulatory Notices; Modification Statement; Ised Canada Regulatory Notices - ABB E-Hub 2.0 User Manual

4 - FCC/ISED Regulatory Notices

Modification Statement

ISED Canada
Regulatory Notices
14 | © 2019 ABB | DOC. N° 1SDH002109A1001 - ECN000125349 - Rev. A
ABB has not approved any changes or modifications to this product by the user. Any
changes or modifications could void the user's authority to operate the product.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject
to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
This radio transmitter 21442-MRG1012 has been approved by Innovation, Science and
Economic Development Canada to operate with the antenna types listed below, with the
maximum permissible gain indicated. Antenna types not included in this list that have a
gain greater than the maximum gain indicated for any type listed are strictly prohibited for
use with this device.
Antenna Types
Cellular 50Ω Dipole
Wi-Fi / Bluetooth 50Ω
Dipole
The E-Hub 2.0 has been certified with the following antennas:
Antenna Types Manufacturer and Model
Linx Technologies ANT-DB1-
RAF-RPS
Wi-Fi/Bluetooth
50Ω Dipole
Taoglas
MA950.W.A.LBICG.005
Taoglas GSA.8827.A.101111
Cellular 50Ω Dipole
Taoglas
MA950.W.A.LBICG.005
Frequency Band
700 MHz
850 MHz
1700 MHz
1900 MHz
2.5 GHz Wi-Fi 802.11a,b,g,n / BLE 4.2 BLE
Bluetooth 5 GHz Wi-Fi 802.11a,b,g,n
Notes
Taoglas MA950.W.A.LBICG.005:
Certified operation:
2.4GHz/5.8GHz MIMO_1 antenna is interfaced to
2.4GHz WiFi/Bluetooth RP-SMA
2.4GHz/5.8GHz MIMO_2 antenna is interfaced to
5GHz WiFi RP-SMA
Opération certifiée:
L'antenne 2.4GHz/5.8GHz MIMO_1 est connectée
au RP-SMA WiFi / Bluetooth à 2,4 GHz
L'antenne 2.4GHz/5.8GHz MIMO_2 est connectée
au RP-SMA WiFi 5 GHz
Taoglas MA950.W.A.LBICG.005:
Certified operation:
LTE MIMO_1 antenna is interfaced to CELL MAIN
SMA
LTE MIMO_2 antenna is interfaced to CELL DIV
SMA
Opération certifiée:
L'antenne LTE MIMO_1 est connectée au SMA
CELL MAIN
L'antenne LTE MIMO_2 est connectée au SMA
CELL DIV
NORMS AND CERTIFICATIONS | FCC/ISED Regulatory Notices
ABB | E-Hub 2.0
Antenna Gain
6.63 dBi
6.63 dBi
6.00 dBi
8.51 dBi
5.47 dBi
7.07 dBi