Introduction; Hazard Categories - ABB Zenith ZTS T Series Quick Start User Manual

4
Z e n i t h Z T S ( D ) 3 0 - 1 2 0 0 A AT S , Q U I C K S TA R T U S E R M A N U A L
—

Introduction

This manual describes the installation,
basic operation, and maintenance of
the Zenith ZTS(D) T-series (30-1200 A,
200-480 Vac) automatic transfer
switches, manufactured by ABB.
Installation instructions for the transfer
switch and available accessories
can be found in the O&M Manual
1SCC303039M0201 on pages 9 and 10.
—

Hazard Categories

The following important highlighted
information appears throughout this
document to warn of potential hazards
or to call attention to information that
clarifies a procedure.
Carefully read all instructions and become
familiar with the devices before trying to
install, operate, service or maintain
this equipment.
Danger
Indicates a hazardous situation that, if not
avoided, will result in death or serious injury.
Warning
Indicates a hazardous situation that, if not
avoided, could result in death or serious
injury.
Caution
Indicates a hazardous situation that, if not
avoided, could result in minor or moderate in-
jury. Failure to comply with these instructions
may result in product damage.
Notice
It is used to notify of practices not related to
personal injury. Failure to comply with these
instructions may result in product damage.