Introduction - ABB GE Entellysis Installation, Operation And Maintenance Manual

A K D - 2 0 A N D E N T E L LY S I S LO W V O LTA G E S W I TC H G E A R
3

1. Introduction

1.1 General information
This manual contains procedures for receiving,
handling, storage, equipment installation,
operation, and maintenance and service of
AKD-20 and Entellisys low voltage switchgear.
Note: The personnel responsible for installing,
operating, and servicing this equipment should
be thoroughly familiar with the contents of
this manual.
Remarque: Le personnel chargé de l'installation, de
l'utilisation et de l'entretien de cet équipement doit
parfaitement maîtriser le contenu de ce manuel.
Before any installation work is performed,
thoroughly read and understand the material in this
instruction manual and the drawings furnished
with the equipment. The documentation shipped
with the equipment includes the Summary, Front
View, Elementary Diagram, Connection Diagram
and Instruction Book. This material is located in a
forward compartment tagged "INSTRUCTIONS IN
THIS COMPARTMENT." The documentation
provides all of the information necessary for
installation of the switchgear. When requesting
information from ABB, include the complete data
appearing on the equipment nameplate, requisition
number, summary number, and elementary
diagram number. The nameplate is located in
the lower left, front corner of the lineup.
When requesting information concerning any
specific item furnished with the switchgear, refer
to that item by description, part number, its
location within this manual, and any applicable
drawing number. Any material external to the
equipment, which may be required to meet local
codes (such as mats, screens, railings, etc.), is not
furnished by ABB.
If there are any questions or requirements not
covered in this manual or in the accompanying
drawings, please contact your ABB
sales representative.