Respironics BiPAP Plus User Manual page 5

Complete the following steps to set up
your M Series device and humidifier.
Connect the humidifier power
supply connector to the device
power supply. Plug the AC power
cord connector into the power
supply, then plug the power cord
into an electrical outlet.
Lift the humidifier door to access
the water tank.
Press the button to begin
therapy.
Plug the power supply cord
connector into the device.
Fill the tank with water until it
reaches the fill line.
Turn the humidifier knob to the
desired setting.
Attach the tubing to the optional
swivel and attach the swivel to the
device's air outlet. Or, attach the
tubing directly to the air outlet.
Place the water tank back in
the humidifier.
CAUTION
DO NOT TIP OR TRANSPORT THE
DEVICE WITH WATER IN THE
HUMIDIFIER TANK.