Using Dc Power - Respironics BiPAP Plus User Manual

3. Plug the power supply cord's connector into the power inlet on the back of the device, as
shown in Figure 3–6.
4. Ensure that all connections are secure.
Warning:
Important!
Warning:
3.4.2 u
sIng
The Respironics DC Power Cord or the Respironics Portable Battery Pack can be used to operate
this device in a stationary recreational vehicle, boat, or motor home. The Respironics DC Battery
Adapter Cable, when used with the DC Power Cord, enables the device to be operated from a
12 VDC free-standing battery.
Caution: When DC power is obtained from a vehicle battery, the device should not
be used while the vehicle's engine is running. Damage to the vehicle or the
device may occur.
Caution: Only use a Respironics DC Power Cord, Portable Battery Pack, and Battery
Adapter Cable. Use of any other system may cause damage to the device or
vehicle.
Refer to the instructions supplied with the DC Power Cord, Portable Battery Pack, and adapter
cable for information on how to operate the device using DC power.
Warning:
B pap p m s u
I lus erIes
f 3–6 C
Igure onneCtIng
Route all AC power cables to avoid tripping.
To remove AC power, disconnect the power supply cord from the
electrical outlet.
Inspect the power cord often for any signs of damage. Replace a
damaged power cord immediately.
dC p
oWer
Route all AC power cables to avoid tripping.
m
ser anual
p s C
the oWer upply ord
d
to the evICe
3-5