Chapter 5: Device Alerts And Troubleshooting; Device Alerts - Respironics BiPAP Plus User Manual

C 5: d
hapter
This chapter describes the device alerts and also provides troubleshooting information for issues
you may run into when using the device.
5.1 d
evICe
The device provides two alert levels, high and medium priority.
•
High Priority – These alerts require operator response. The alert signal consists of a high
priority sound, which is a continuous two-beep pattern (indicated in the following table
as: • • • •). Additionally, the backlights on the buttons will provide a high priority
flashing pattern consisting of a continuous, bright-to-off, two-flash pattern (indicated in the
following table as: ◊◊ ◊◊ ◊◊).
• Medium Priority – These alerts require operator response. The alert signal consists of a
medium priority sound, which is a continuous one-beep pattern (indicated in the following
table as: • •). Additionally, the backlights on the buttons will provide a medium priority
flashing pattern consisting of a continuous, bright-to-dim, one-flash pattern (indicated in the
following table as: ◊
B pap p m s u
I lus erIes
a
evICe lerts
a
lerts
◊ ◊).
m
ser anual
t
and rouBleshootIng
5-1