Changing The Device Settings; Navigating The Display Screens - Respironics BiPAP Plus User Manual

4.3.2.2
If Bi-Flex has not been prescribed for you and your provider has disabled the Bi-Flex feature, the
following screen appears when you press the Bi-Flex button, and you cannot enable or adjust the
setting.
4.4 C
hangIng
You can view the set pressure on the Active Display screen, and you can view the following
settings on the Patient Data screens:
• Therapy usage hours
• Number of sessions greater than 4 hours
• Compliance check value
• Summary Data
Additionally, you can view and modify the following settings on the Patient Setup screens:
• Bi-Flex (if enabled by your home care provider)
• Rise Time (if Bi-flex is disabled)
• Ramp starting pressure (if enabled by your home care provider)
• Mask alert (enable/disable)
• Auto off (enable/disable)
4.4.1 n
avIgatIng
Use the button to navigate to the next screen and the button to navigate to the previous
screen. Use the
4-4
B -f d
I lex IsaBled
f 4–5 B
Igure
d
the evICe
d s
the Isplay
+
and — buttons to adjust the settings on the Patient Setup screens.
-f d s
I lex IsaBled
s
ettIngs
Creens
Creen
B pap p m s u
I lus erIes
m
ser anual