Supplying Power To The Device; Using Ac Power - Respironics BiPAP Plus User Manual

3.4 s
upplyIng
You can power the device using AC or DC power.
Caution:
Warning:
Important!
3.4.1 u
sIng
Complete the following steps to operate the device using AC power.
1. Plug the socket end of the AC power cord into the power supply, as shown in Figure 3–5.
2. Plug the pronged end of the AC power cord into an electrical outlet that is not controlled by
a wall switch.
3-4
p
oWer to the
If this device has been exposed to either very hot or very cold temperatures,
allow it to adjust to room temperature before beginning the following setup
procedures.
This device is activated when the power cord is connected. Pressing the
button turns the airflow on or off.
If you are using your device with a humidifier, refer to the Quickstart
Guide included with your device or the instructions included with your
humidifier for details on how to power the device and humidifier.
aC p
oWer
f 3–5 C
Igure onneCtIng
d
evICe
p C
the oWer ord to the
B
p s
oWer upply
pap p m s u
I lus erIes ser
m
anual