The device's display screen shows the set pressure, patient data, instructions, and error messages.
See Chapter 4 for instructions on navigating the display screens.
Figure 2–3 provides a view of the entire device control panel, with the cover door open.
2.1.1 C
ontrol
Some screens have time-out periods. The screen's timer starts when the screen is initially displayed
and is restarted whenever a button is pressed. The screen times out after one minute if there is no
activity and returns to the Standby screen.
2.2 r
ear
Figure 2–4 shows the device's rear panel (without a humidifier).
The rear panel contains the following:
•
A filter area where the filter(s) supplied with your device should be inserted.
•
A DC power inlet where the power cord is connected (see Chapter 3, Setup, for complete
information on supplying power to the device).
•
The air outlet port where the breathing circuit's flexible tubing is attached.
2-2
Cover Door
Previous
Screen
Button
Decrease
Button
Ramp
Button
f
2–3 d
Igure
p
I
anel
naCtIvIty
p
anel
f
Igure
Placement Area
for Optional Quick
Reference Label
Next
Screen
Button
Increase
Button
Bi-Flex
Bi-Flex
Start/Stop
Button
Button
C
p
evICe
ontrol
anel
DC Power Inlet
Air Outlet Port
Filter Area
2–4 r
p
ear
anel
B
pap p
I
m s
u
m
lus
erIes
ser
anual