Patient Reminder Screen - Respironics BiPAP Plus User Manual

Auto Off
Feature: ON
After you have finished modifying the Patient Setup screens, press the
Standby screen.
Note:
The Setup menu automatically times out and returns to the Standby screen
after one minute of inactivity.
4.5 p
atIent
Your home care provider may set a patient reminder that will appear periodically to alert you
to take certain actions, such as replacing your mask. A message will appear whenever the device
transitions from the Active Display to the Standby state if the period of time specified by your
provider has expired.
You can acknowledge the message by pressing any of the display buttons (+, –, or ). If you
do not acknowledge the message within six minutes of it appearing on the screen, it will time
out and disappear. The message will continue to display for three consecutive days whenever the
device transitions from Active to Standby until it is acknowledged. If, after three days, you still
have not acknowledged the message, then the reminder period will reset and no more reminders
will display until the next time the patient reminder setting expires.
Figure 4–8 shows an example of a patient reminder message.
4-8
6. Auto Off Screen
You can enable this feature if you want the device to automatically
turn the airflow off whenever you remove the interface (e.g.,
mask) from your airway.
Press the + or – buttons to select off or on. If this feature is
enabled, the text Auto Off appears on the Standby screen if the
device detects that you have removed your mask. The airflow
shuts off, and the Auto Off text continues to appear on the
Standby screen until the condition is corrected.
r s
emInder Creen
Attention
Check your mask. A replacement
may be available.
Call (XXX) XXX-XXXX.
f 4–8 p
Igure
r s
atIent emInder Creen
B pap p
I
button to return to the
m s u m
lus erIes ser anual