Cautions - Respironics BiPAP Plus User Manual

on, oxygen delivered into the tubing may accumulate within the device's enclosure. Oxygen
accumulated in the device enclosure will create a risk of fire.
• Oxygen supports combustion. Oxygen should not be used while smoking or in the presence
of an open flame.
• When using oxygen with this system, a Respironics Pressure Valve (Part Number 302418)
must be placed in-line with the patient circuit. Failure to use the pressure valve could result
in a fire hazard.
• Do not use the device in the presence of a flammable anaesthetic mixture in combination
with oxygen or air, or in the presence of nitrous oxide.
• Do not use this device if the room temperature is warmer than 95°F (35°C). If the device is
used at room temperatures warmer than 95°F (35°C), the temperature of the airflow may
exceed 106°F (41°C). This could cause irritation or injury to your airway.
• Do not operate the device in direct sunlight or near a heating appliance because these
conditions can increase the temperature of the air coming out of the device.
• Do not attempt to wear your mask without the device turned on. Doing so could result in
CO rebreathing.
2
• Contact your health care professional if symptoms of sleep apnea recur.
• If you notice any unexplained changes in the performance of this device, if it is making
unusual or harsh sounds, if the device or the power supply are dropped or mishandled, if
water is spilled into the enclosure, or if the enclosure is broken, discontinue use and contact
your home care provider.
• Repairs and adjustments must be performed by Respironics-authorized service personnel only.
Unauthorized service could cause injury, invalidate the warranty, or result in costly damage.
• Periodically inspect electrical cords, cables, and the power supply for damage or signs of wear.
Discontinue use and replace if damaged.
• To avoid electric shock, unplug the device before cleaning it. DO NOT immerse the device
in any fluids.
• Pins of connectors identified with the ESD warning symbol (
Connections should not be made to these connectors unless ESD precautionary procedures are
used. Precautionary procedures include methods to prevent build-up of electrostatic discharge
(e.g., air conditioning, humidification, conductive floor coverings, non-synthetic clothing),
discharging one's body to the frame of the equipment or system or to earth or a large metal
object, and bonding oneself by means of a wrist strap to the equipment or system or to earth.
1.3.2 C
autIons
A Caution indicates the possibility of damage to the device.
• The device may only be operated at temperatures between 41°F (5°C) and 95°F (35°C).
• If this device has been exposed to either very hot or very cold temperatures, allow it to adjust
to room temperature before starting therapy. Condensation may damage the device.
B pap p m s u
I lus erIes
m
ser anual
)should not be touched.
1-3