Introduction; General; Instruments Covered By This Manual; Serial Number Plate ( Frg ) - HP 8112A Operating, Programming And Servicing Manual

I ntroduction

General

Instruments Covered
by This Manual
This manual describes the following procedures for the HP 81 12A
50 MHz Programmable Pulse Generator:
•
Installation
•
Operating
•
Programming
•
Testing Performance
•
Adjustment
•
Servicing
A Microfiche version of this manual is available on 4
microfi l m transparencies (refer to title page for order number) .
The microfi c he package also includes the latest Manual Changes
supplement and all relevant Service Notes.
HEWLETT-PACKARD
Boeblingen Fed. Rep. of Germany
Figure 1·1. Serial Number Plate (FRG)
Attached to the rear of the instrument is a serial number plate
(Figure 1-1). The first four digits only change when there is a
signifi c ant modifi c ation to the instrument , the last five digits are
assigned sequentially to instruments.
the instruments with the serial numbers quoted on the title page.
instruments with higher serial numbers, refer to the Manual Change
sheets in Appendix C
Hewlett-Packard recommends that you periodically request the
latest Manual Change supplement by quoting the part-number and
print-date of this manual, both of which appear on the title page.
This manual applies directly to
To keep this manual up-to-date,
Updating.
1
x
6 inch
GmbH
For
Introduction 1·1