HP 8112A Operating, Programming And Servicing Manual page 60

Selecting Output
Mode
8112A PULSE GENERATOR 50MHz
HElfl.ETT · PACICARD
Limited Output
Caution
Complement Output
Disabled Output
4-16 Operating
Figure 4· 1 1. Output controls
Pressing the (LIMIT ) key sets the current high and low output levels
( )
HIL,LOL as output limits which cannot be exceeded until limited
output mode is switched off. While limited output mode is active,
the high and low output levels
output limits.
Limited output mode is switched off by pressing the (LIMIT ) key again.
The (LIMIT ) key LED is lit when this mode is active.
I
Limit does not work when using HILC mode, the LIMIT key will
fl.ash if HILC is selected to remind you that it is no longer active.
Pressing the ( COMPL) key complements the instrument output,
pressing the key again returns the instrument output to normal.
The (coMPL) key LED is lit when the output is complemented.
Pressing the (DISABLE ) key disables the instrument output, pressing
the key again enables the output.
The (DISABLE) key LED is lit when the output is disabled.
L
JllJT COll PL
G G G
� 0
( )
HIL,LOL can be varied within the
DJMll L&
Lt