Ranging Examples; Up And Down-Ranging Using The Range Key - HP 8112A Operating, Programming And Servicing Manual

Non-active S lope
X
=
Active S lc:ipe
Y
=
Up and Down-ranging
Using the RANGE key
4·12 Operating
50ns 99ns 500ns 999ns
Range
2:
X1
Y1
Figure 4·9. Ranging examples
Active slope moves from Range 3 to Range 2 (Y1 )
Inactive slope Change Value
X l
X2
X3
Active slope moves from Range 3 to Range 4 (Y2)
Inactive slope Change Value
X l
X2
X3
When this key is used to move a currently active slope up or down
a range, the non-active slope will be automatically pulled into the
Same Decade as the active slope setting. This effect is particularly
usefull for fast ranging between decades.
/ / / / / / /
/ / / JI' / / /
X2 / / / / / / /
/ / / / / / /
/ / / / / / /
,,,,,,, Range 5
Y2
Table 4-2.
n o change in a shared overlap, range 2/3
in overlap with higher range (
-:-10
not in overlap
-:-10
Table 4·3.
x lOO in shared overlap
x lO not in overlap
no change in overlap with higher range
'
'
'
'
'
'
'
'
'
'
'
'
'
Reason
4)
Reason