System Features; Quick Setup - Electro-Voice EVERSE 8 User Manual

EVERSE 8
2.2

System features

EVERSE8-US/EVERSE8-EU/EVERSE8-W
–
–
–
–
–
–
2.3

Quick setup

Full-range loudspeaker
To set up the loudspeaker:
Step
1.
2.
Electro-Voice
Long run-time removable and replaceable battery pack
The EVERSE 8 battery pack will provide 6+ hours of constant music playback at maximum
output levels, or over 12+ hours at 95 dB SPL average. The EVERSE 8 has integrated
power saving features to extend battery life when no signal is present. The 12 V DC jack
on the EVERSE 8 loudspeaker can be used to power a wireless microphone receiver like
the Electro-Voice RE3 or R300.
Real professional level output and Electro-Voice sound quality
The EVERSE 8 features an 8-inch woofer with SST port and a 1-inch titanium dome
tweeter which produces over 121 dB SPL max, from 50 Hz to 20 kHz. The 100° x 100°
wave guide ensures even coverage across all frequencies. Two additional monitor angles
(30° and 55°) ensure the right coverage and position for any situation.
Easy to use with QuickSmart Mobile app and Electro-Voice's Intuitive User Interface
The EVERSE 8 features Electro-Voice's intuitive QuickSmart DSP with single encoder and
push key interface for simple and quick setup. EVERSE 8 can be paired via Bluetooth® to
a mobile device with the QuickSmart Mobile app installed to provide easy remote control
of all audio functions. The QuickSmart Mobile app allows pairing and grouping of up to
six loudspeakers, in any combination, including EVERSE 8 , ELX200 powered family, and
the EVOLVE family.
High Quality Stereo Bluetooth® streaming
The EVERSE 8 features Bluetooth® streaming. Two EVERSE 8 loudspeakers can be paired
for true wireless stereo (TWS) streaming from a mobile device.
POWERED BY DYNACORD with built-in digital 4-channel mixer
The EVERSE 8 features a built-in 4-channel mixer with FX, EQ, automatic feedback
suppression and ducking functions. The mixer includes two XLR/TRS combo jacks,
including 48 V phantom power on INPUT 1 (XLR) and Hi-Z compatibility on INPUT 2
(TRS). The mixer also includes Stereo Bluetooth® and 3.5 mm connections.
Auto-Standby
The EVERSE 8 offers an automatic standby function after 15 minutes without signal. This
extends the battery runtime in case the loudspeaker is not being used. The loudspeaker
can be re-activated to full operation by pressing a button on the panel or with the app.
Connect the AC power cord from a
grounded receptacle to the MAINS IN to
ensure the battery has sufficient charge.
Note: It is recommended to leave the
loudspeaker plugged in and charging for
24 hours the first time it is used.
Switch power to ON.
Illustration
User manual
Description | en
ON
OFF
2022-10 | 02 | F.01U.401.530
15