Technical Information; Technical Data - VERDER JEC JRZP Series Operating & Maintenance Manual

TECHNICAL INFORMATION

TECHNICAL DATA

SPECIFICATIONS
Maximum Inlet Pressure ...................................................................... 10 bar (1,000 kPa, 145 psi)
Maximum Differential Pressure ............................................................ 15 bar (1,500 kPa, 218 psi)
Maximum Flow Rate ................................................................................. 92 ㎥/hr (405 US GPM)
Temperature Range ................................................................... -10 ℃ to 180 ℃ (14 ℉ to 356 ℉)
Viscosity Range ............................................................................................... Up to 1,000,000 cPs
Noise Level .................................................................................................................... 60 ~ 80 dB
MATERIALS
Product Wetted Steel Parts ............................................................................ SUS316L (standard)
Product Wetted Seals .......................................................................................... EPDM (standard)
Alternative Seals ............................................ NBR, FPM, PTFE Encapsulated, Perfluoro elastomer
SHAFT SEALS
Seal type .................................................................. Single and Double Mech., O-ring and Lip-seal
Flushing Water Pressure ................................................. Recommended less than 0.5 bar (7 psi)
Flushing Water Consumption ..................................... 0.25~0.5 ℓ /min (30~60 cubic inches/min)
Stationary Seal Ring Material ............................... Tungsten Carbide (standard) or Silicon Carbide
Rotating Seal Ring Material .................................. Tungsten Carbide (standard) or Silicon Carbide
O-ring Material .................................................................................................... EPDM (standard)
Lip-seal Material ............................................................................. PTFE(Polytetrafluoroethylene)
ROTOR INFORMATION
316L Stainless steel Bi-wing rotor (standard)
Non-galling (Illium8) Bi-wing rotor (option)
OPTIONAL INFORMATION
Heating jacket on rotor case and front cover
Horizontal type, Rectangular inlet version
Surface hardening (CrN/TiN)
Please consult JEC incase over 92 ㎥/hr up to 450 ㎥/hr
26