System Requirements - VDO SmartTerminal Operating Instructions Manual

Device description
IMPORTANT
• Any computer if the VDO SmartTerminal is to be used on a standalone
basis.
VDO TerminalService performs the connection to the VDO SmartTerminal in
order to check theVDO SmartTerminal for new data in regular intervals and to
transfer these.
Access from a PC to the internal memory of the VDO SmartTerminal usually
only occurs via this VDO TerminalService.
Access from a PC to the internal memory of the VDO SmartTerminal usually
only occurs via this VDO TerminalService. Manual access to this data
memory via Windows®-Explorer is only possible with a network connection.
Configuration options
• Changing the communication port used for the connection between
VDO TerminalTools and VDO TerminalService.
• Importing the data encryption on the VDO SmartTerminal after a reinstalla-
tion.
• Adjusting the download directory for the data transfer from the
VDO SmartTerminal.
• Restoring the access data of the administrators.
• Monitoring the communication between the VDO TerminalService and a
VDO SmartTerminal.
To configure the VDO TerminalService: è
USB driver
You need the USB driver if you want to connect the VDO SmartTerminal to a
PC using the USB cable supplied.
If selected, the USB driver is also loaded during installation: è
}
.
software [ 19]

System requirements

Software requirements
To use the VDO TerminalTools, the computer must meet the following require-
ments:
Component
Processor
Working memory
Hard disk space
© Continental Automotive GmbH
VDO TerminalService [
Properties
Pentium or compatible CPU with 1 GHz and
32-Bit or 64-Bit architecture
1 GB/ 256 MB free
500 MB free for the installation and storage of
the download data
General Information
}
23]
Installation of the
12