User And Handset Registration And Subscription; Registration And Subscription - SpectraLink IP-DECT Server 400 Installation And Configuration Manual

Chapter 5: User and Handset Registration
and Subscription
Note
In addition to registering the handsets, you also have to register the users on the SIP-PBX.
For registering users on the PBX, refer to the PBX user guide.

Registration and Subscription

When you register a handset, you enter information about the handset settings such as the
handset serial number (IPEI), name, etc., in the system database. You use the web based
administration page named Users to enter the information.
When you subscribe a handset, you subscribe a registered handset to the system for usage. The
subscribstion is carried out using the handset itself. If the handset is not registered in the system
database, subscription of the handset is not possible.
Registering Spectralink Handsets
When you register a handset, you can either use the web based user page on the Spectralink
IP-DECT Server 400 or you can use provisioning (see the provisioning guide on
www.spectralink.com).
Each handset in the wireless solution must be programmed into the Spectralink IP-DECT Server
400 before the handset can be used. The IPEI (serial number) is a unique fingerprint of a handset.
The serial number is programmed into the handset during the manufacturing process and cannot
be changed by field personnel.
The following options are available when you register handsets on a Spectralink IP-DECT Server
solution:
Register with IPEI number
•
Register without IPEI number
•
Auto create users
•
Register with IPEI number
To register a handset with an IPEI number, use the web based Administration Page of the
Spectralink IP-DECT Server 400. For each user you have to enter a user name from the PBX
system and the IPEI number of the handset. If required, you must also enter SIP information and
a subscription Access Code (AC).
14219101 Version 3.0
August, 2013 17