Auto Switch-On - Weinmann VENTImotion Series Description Of Unit And Operating Instructions For Patients

Soft start indicator
Respiratory
Bar chart
phase switch

5.2 Auto switch-on

When auto switch-on is activated, you can switch on the VENTImotion using the on
/ off switch
using the on / off switch
Activate auto switch-on
1. Seal the hose system or put on the mask.
2. Press the on / off switch
20 EN Operation
The bar chart shows the inspiratory and expiratory
pressure curve.
The respiratory phase switch indicator shows whe-
ther the current respiratory phase was triggered
spontaneously by the patient (
(
cator switches from left (inspiration) to right (expi-
T
ration). The illustration shows mechanically-trigge-
red expiration.
or by "taking a breath". You can only switch off the VENTImotion
.
to switch on the VENTImotion.
3. Press the menu switch
pears in the display. The selection bar is over
Drying process.
4. Use the dial to select the menu item
(Off)
). Depending on the respiratory phase, the indi-
T
and press the dial.
) or mechanically
S
. The patient menu ap-
Auto switch-on