Flight; Flight Environment Requirements; Geo (Geospatial Environment Online) System - dji P4 MULTISPECTRAL User Manual

Flight

Once the pre-flight preparation is complete, it is recommended to hone your flight skills through
training and practice flying safely. The altitude limit is 1, 640 feet (500 meters). Avoid flying at any
altitudes higher. It is important to understand basic flight guidelines for the safety of both you and
those around you. Refer to the disclaimer and safety guidelines for more information.

Flight Environment Requirements

1. Do not use the aircraft in severe weather conditions. These include wind speeds exceeding 10
m/s, snow, rain and fog.
2. Only fly in open areas. Tall structures and large metal structures may affect the accuracy of the
on-board compass and GNSS system.
3. Avoid obstacles, crowds, high voltage power lines, trees, and bodies of water.
4. Minimize interference by avoiding areas with high levels of electromagnetism, including base
stations and radio transmission towers.
5. Aircraft and battery performance is subject to environmental factors such as air density and
temperature. Be very careful when flying at altitudes greater than 19, 685 feet (6000 meters)
above sea level, as the performance of the battery and aircraft may be affected.
6. In the Earth's polar regions the aircraft can only operate in Attitude mode or using vision
positioning.

GEO (Geospatial Environment Online) System

Introduction
DJI's Geospatial Environment Online (GEO) System is a global information system committed to
providing real-time airspace information within the scope of international laws and regulations.
GEO provides flight information, flight times and location information to assist Unmanned Aerial
Vehicle (UAV) users in making the best decisions related to their personal UAV use. It also includes
a unique Regional Flight Restrictions feature which provides real-time flight safety and restriction
updates and blocks UAVs from flying in restricted airspace. While safety and obeying air traffic
control laws is a paramount concern, DJI recognizes the need for exceptions to be made under
special circumstances. To meet this need, GEO also includes an Unlocking feature that enables
users to unlock flights within restricted areas. Prior to making their flight, users must submit an
unlock request based on the current level of restrictions in their area.
GEO Zones
DJI's GEO System designates safe flight locations, provides risk levels and safety concerns for
individual flights, and offers restricted airspace information, which can be viewed by users in real
time on DJI GS Pro. The locations designated by GEO are called GEO Zones. GEO Zones are
specific flight areas that are categorized by flight regulations and restrictions. GEO Zones that
prohibit flight are implemented around locations such as airports, power plants, and prisons. They
can also be temporarily implemented around major stadium events, forest fires, or other emergency
situations. Certain GEO Zones do not prohibit flight but do trigger warnings informing users of
potential risks. All restricted flight areas are referred to as GEO Zones, and are further divided into
©
2019 DJI All Rights Reserved.
41