Unpacking The Lps; About The Lps - LEAB LPS Series User Manual

Installation instructions
4

Unpacking the LPS

To unpack the device, perform the following steps:
1. Lift the device out of the transport box using the black carrying handles on
the front and back.
The device is unpacked.
After unpacking, check the scope of delivery of the LPS (see page 7).
5

About the LPS

Number Details
1 On/Off button
2 Display
3 Control panel / navigation buttons
4 Carrying handle (front)
5 Two-pin earthed socket, AC output (230 V)
6 Fuse cap, RCD
Page 5 of 25
Unpacking the LPS