Disassembly; Disposal; Eu Declaration Of Conformity - LEAB LPS Series User Manual

Installation instructions

16 Disassembly

To dismantle the LPS, perform the following steps:
1. Press the On/Off button to open the On/Off menu.
2. Press the OK button to confirm the 'Shutdown' menu item and switch off
the LPS.
3. Disconnect the two-pin earthed plug, Neutrik and Anderson connectors as
well as the D-Sub data adapter from the LPS.
4. If necessary, loosen the screws for fastening the LPS.
The LPS is now disassembled.
You can transport the LPS using the carrying handles.

17 Disposal

Dispose of the device in accordance with the Battery Act.
The device must not be disposed of with household waste.
Take it to a recycling point or send it to your point of sale.

18 EU Declaration of Conformity

The LPS
with the models 1212, 1512, 2512
complies with the requirements of the following
directives:
2014/30/EC:
2014/35/EC:
2011/65/EU:
EMC
NRL
RoHS
Page 25 of 25
Disassembly